SINC 2 Ergonomic Chair
SINC 2 Ergonomic Chair
Niture SINC Series · Two Smart-Glide™ Lock Points

SINC 2 Ergonomic Chair

The lumbar-focused SINC: adjustable twin lumbar contact, and Smart-Glide™ that locks upright or at its lowest point.

The Niture SINC 2 is a Wintex Mesh ergonomic chair for people who want more defined lower-back support they can adjust. It combines Smart-Glide™ back-support movement with Twin Dynamic Lumbar Support (about 2 cm of depth adjustment), synchronized recline with a quick-tension knob, a dual-joint headrest, 6D Dual-Axis armrests that move with the recline, and four recline locks up to 145°. It is the only SINC whose Smart-Glide™ also locks at its lowest point.

SINC 2 has the widest recommended height range in the SINC Series, approximately 145–190 cm, and supports up to 130 kg. Together with SINC, it is one of the two models we recommend for users shorter than 158 cm. It comes with a 5-year warranty, an integrated mini footrest and an optional retractable footrest, and you can try it free at the Niture showroom in Puchong, Selangor.

SINC 2 Quick Facts

Recommended height
145–190 cmWidest range in the SINC Series
Maximum load
130 kg
Seat height from ground
45–53 cm≈38.5–44.5 cm when seated
Usable seat depth
≈38.5–49.5 cmSeat pan 53 × 53 cm
Lumbar support
Twin Dynamic≈2 cm depth · ≈8–30 cm above seat
Smart-Glide™ lock
Upright + lowestUnique to SINC 2
Recline
Up to 145°4 locking positions
Warranty
5 years

≈ values are manually measured fitting references (allow about ±1 cm). Seated seat height is measured at the showroom with a 75 kg adult, using the same method as the Niture 2026 buying guide.

Adjustment Video

How to Adjust SINC 2

Follow the adjustment guide to set up SINC 2 around your body, sitting position and support preference.

SINC 2 Adjustment Guide

How to Adjust SINC 2

Follow the video guide to learn the main SINC 2 adjustment controls and set the chair around your body and sitting preference.

Start with the major fit adjustments

Set seat height, usable seat depth and backrest position first, then fine-tune lumbar contact, armrests, headrest, recline and Smart-Glide™ according to your sitting preference.

Quick decision guide

Is SINC 2 the Right Chair for You?

SINC 2 is built for people who notice their lower back first. Its twin lumbar gives more defined contact you can adjust, and its Smart-Glide™ can be held at its lowest point for a steadier upright feel. If that sounds like you, it is a strong fit.

SINC 2 suits you if you:

  • Want clearly felt lower-back contact that you can adjust
  • Spend most of the day upright, focused on desk work
  • Like the option to lock Smart-Glide™ at its lowest point as well as upright
  • Want armrests that follow you when you recline
  • Are about 145–190 cm tall, including users well below 158 cm

Before you choose, keep in mind:

  • The twin lumbar gives more noticeable contact than SINC's adaptive lumbar. If you prefer a gentler, set-and-forget feel, compare SINC.
  • The retractable footrest is optional; the integrated mini footrest is always included.
  • Height alone does not decide fit. Check seat depth, lumbar height and headrest reach in the fit measurements.

When Another Niture Chair Fits Better

If one of these describes you, start with the suggested model instead.

If you

Prefer lumbar support that adapts on its own

SINC is the balanced all-rounder, with adaptive lumbar support that needs no setting and a 150–190 cm range.

If you

Want the most adjustable SINC

UltraSinc is the flagship SINC, with adaptive lumbar that pivots, two side airbags and a forward-tilting upper back.

If you

Want essential Smart-Glide™ with a footrest included

SINC Lite keeps the core Smart-Glide™ experience and the same quick-tension recline, at a lower price.

If you

Weigh around 100 kg or more, or find chairs recline too easily

SINC 3 has stronger automatic recline resistance and firm lower-back support.

If you

Like to sit slightly leaned back most of the day

SINC Air is the relaxed SINC, with recline to 150°. It is rated up to 110 kg.

If you

Don't need Smart-Glide™

The Hammock Series uses tension-knob recline. Hammock 1 gives focused support; Hammock 2 gives wrapping support. Both are rated up to 110 kg.

Still deciding? Answer a few questions in the Chair Finder, or sit in SINC 2 and the other models free at our Puchong showroom.

Dynamic recline support

Smart-Glide™ with Two Lock Points, and Quick-Tension Recline

SINC 2 uses two separate systems: a synchronized recline mechanism that controls how the chair tilts, and Smart-Glide™, which controls how the back support follows you as you move. SINC 2 is the only SINC whose Smart-Glide™ can be locked at its lowest point as well as upright.

The recline mechanism tilts the backrest and seat together at a 2:1 ratio. A rotary quick-tension knob sets how easily it reclines, with four resistance levels across three turns.

Smart-Glide™ works on its own, even when the recline is locked. At maximum recline the seat rises about 1.5 cm. It does not slide forward.

Smart-Glide™ lock points
2
Backrest-to-seat recline ratio
2:1
Recline tension levels
4
Niture SINC 2 Smart-Glide backrest movement, lockable at the upright position and at its lowest point

Three Movements, Three Different Jobs

These are often described as one feature. On SINC 2, each one is separate.

Synchronized recline

How the chair tilts

As you lean back, the backrest and seat tilt together, with the backrest moving twice as far as the seat. The armrests move with them.

Ratio
2:1
Maximum recline
145°
Locking positions
4
Quick-tension knob

How hard the backrest pushes back

Start at the lightest setting, then turn the knob forward one full turn at a time. Each turn adds about one 20 kg body-weight reference level.

Base
≈50 kg
+1 turn
≈70 kg
+2 turns
≈90 kg
+3 turns
≈110 kg
Smart-Glide™

How the back support follows you

When activated, the back-support structure moves with your body as your sitting position changes, whether the recline is locked or free.

Lock points
Upright + lowest
Seat slides forward
No
Works with recline locked
Yes

The tension values are resistance references, not weight limits. They describe how the recline feels and do not change SINC 2's maximum user load of 130 kg.

Lock, Hold Low or Activate Smart-Glide™

Use the Smart-Glide™ lever on the backrest.

Lock

Held upright

Lock the back support at its original upright position for a steady, fixed support feel.

Lock low

Held at the lowest point

Lock it at its lowest Smart-Glide™ position instead, an option unique to SINC 2.

Activate

Free to move

Release the lever and the back support follows your movement, even while the recline itself is locked.

What Smart-Glide™ is not

  • Not a seat slider: seat depth is set separately
  • Not a lumbar adjustment: lumbar depth has its own knob
  • Not the recline: angle, locks and tension come from the recline mechanism

How to test it in the showroom

  1. Lock Smart-Glide™ upright and lean backFeel the 2:1 synchronized recline, then try a turn on the tension knob.
  2. Now lock it at the lowest pointCompare the fixed feel against the upright lock.
  3. Activate Smart-Glide™ and shift your weightFeel the back support follow you, with the recline locked or free.
Twin Dynamic Lumbar Support

Lumbar Support: Two Sections, About 2 cm of Depth

SINC 2 supports the lower back with two lumbar sections that respond to your back independently. A rotary knob moves them about 2 cm forward, so you choose between gentler and more noticeable contact.

The twin lumbar surfaces start about 8 cm above the seat and cover about 22 cm of your lower back, a contact zone of approximately 8–30 cm. Their height follows the backrest: raise or lower it through four levels (6 cm in total) to bring the lumbar to the curve of your lower back.

Lumbar sections
2
Depth travel
≈2 cm
Contact zone from seat
≈8–30 cm
Height via backrest
4 levels / 6 cm
Niture SINC 2 Twin Dynamic Lumbar Support with two independently responsive lumbar sections

Lumbar Depth: Rotary Knob

Start at the rear, then turn forward until the contact feels right
  1. RearGentler contact
  2. ≈2 cm forwardMore noticeable contact

Bringing the lumbar forward also shortens the usable seat depth, because your back meets the chair earlier. See seat fit for the ranges.

Niture SINC 2 lumbar support moving about 2 cm forward with the rotary knob

Two Sections That Move Independently

Each lumbar section responds to its side of your lower back, so contact stays even when you twist, reach or shift your weight.

Rear setting

Gentler contact

Useful when you prefer less pronounced pressure against the lower back.

Forward setting

More noticeable contact

Brings the lumbar surfaces closer for firmer, more clearly felt lower-back support.

Fitting tip: set the lumbar in this order

  1. Adjust the backrest height until the twin lumbar sections meet the curve of your lower back.
  2. Start with the lumbar knob at the rear, then turn it forward until the contact feels supportive, not pushy.
  3. Sit for a few minutes and shift your weight. Contact should still feel even across both sections.
Upper-body fitting

Backrest and Headrest: Fit Your Torso, Then Your Neck

People of the same height can have very different torso lengths. SINC 2 handles this in two steps: a four-level backrest that brings the twin lumbar to your lower back, then a dual-joint headrest that reaches your neck.

Niture SINC 2 backrest height adjustment in 4 levels over 6 cm
1 Backrest height

4-Level Backrest Height Adjustment

Raise the backrest through four levels, 6 cm in total, so the back support meets your torso. This is also how you set the height of the twin lumbar. See lumbar support.

Height range
4 levels / 6 cm
Backrest width
55 cm
Niture SINC 2 dual-joint headrest with 7 cm depth, 70 degree rotation and 70 degree tilt
2 Headrest

Dual-Joint Headrest That Reaches Your Neck

Extend the headrest forward, then tilt and rotate it so it meets your neck, whether you sit upright at the desk or lean back.

Depth
7 steps / 7 cm
Tilt
70°
Rotation
70°
Width
40 cm
≈51–79.5 cmHeadrest height from the seat: practical neck-support reach

How the headrest reaches your neck

The headrest has no separate height slider. Its reach comes from three adjustments working together:

  • Dual joint tilted upward
  • Depth extended up to 7 cm
  • Backrest raised through its four levels

Fitting tip: work from the lower back up

  1. Set the backrest height so the lumbar meets your lower back first. Don't set it for the headrest.
  2. Extend the headrest depth until it is just behind your neck in your normal sitting position.
  3. Fine-tune tilt and rotation, then lean back to check it still meets your neck when reclined.

Long torso?

Because the backrest height adjusts, SINC 2, like every SINC model, can raise its support for longer torsos. Check that the headrest still reaches your neck with the backrest set for your lower back.

Seat fit + arm support

Seat Fit and Armrests: Legs, Knees and Elbows

Set the seat for your legs first, then bring the armrests to your elbows. These are the measurements that decide whether SINC 2 fits your body, not just your height.

1

Seat Height and Usable Seat Depth

Niture SINC 2 sliding Wintex Mesh seat with adjustable seat depth
Seat height (unloaded)
45–53 cmFloor to seat front edge
Seat height (seated)
≈38.5–44.5 cmWith a 75 kg adult seated
Seat pan
53 × 53 cmPhysical seat size

Usable seat depth: ≈38.5–49.5 cm

Usable depth is the distance from where your back meets the chair to the front edge of the seat. It changes with both the seat slider (4 steps, 44–50 cm) and the lumbar knob, because a lumbar set further forward meets your back earlier. This is the shortest usable depth in the SINC Series, which helps users with shorter thighs.

SINC 2 seat fit (approximate)
SettingValue
Seat slider4 steps · 44–50 cm
Seated seat height≈38.5–44.5 cm
Lumbar depth knob≈2 cm forward
Usable depth, all settings≈38.5–49.5 cm

≈38.5–49.5 cm is the combined fitting range from the lumbar contact point to the seat front edge, not the travel of the seat slider alone. Measured manually; allow about ±1 cm.

Wintex Mesh seat

Air passes through the seat, so less heat builds up against your thighs during long sitting.

Wintex Mesh backrest

The same breathable mesh continues through the backrest, keeping airflow across both main contact areas.

2

6D Dual-Axis Synchronized Armrests

Niture SINC 2 6D Dual-Axis armrests adjusting in height, tilt, rotation, depth, width and pivot
Six adjustment directions

Bring the Pads to Your Elbows

Two pivot axes move the whole armrest rather than just sliding the pad, so support can follow your elbows for typing, mouse work, phone use or writing.

  1. 01Height · 7 levels / 9 cm
  2. 02Pad tilt · 20°
  3. 03Rotation · 360°
  4. 04Depth · 54 cm
  5. 05Width · 13 cm
  6. 06Pivot · 270°
Height from seat
≈20.5–29.5 cm
Inner width
≈33–61 cm
Height from floor
66–81 cm
Niture SINC 2 armrests moving with the chair as it reclines, keeping forearm support aligned
Synchronized arm support

Armrests Move with the Recline

The armrests are attached to the reclining structure, so they tilt back with you instead of staying behind at desk level.

At the deskPads set around your keyboard and mouse height.
Leaning backPads follow the chair, so your forearms stay supported.

Fitting tip: seat first, arms second

  1. Set seat height so your feet rest flat and your thighs are roughly level.
  2. Sit fully back, then move the seat until there is a few fingers' gap behind your knees.
  3. Set armrest height so your elbows rest without lifting your shoulders.
  4. Swing the armrests inward and adjust reach, tilt and rotation to your keyboard or mouse.
Recline + recovery

Four Recline Positions up to 145°, with Two Footrest Options

SINC 2 locks at four recline positions, up to a maximum of 145°, and the armrests move with you. Use the first two for desk work and calls, and the deeper two for reading, viewing and short breaks. Set how easily it reclines with the quick-tension knob.

  1. Position 01 Upright

    Focused keyboard and mouse work at the desk.

  2. Position 02 Light recline

    Online meetings, calls and lighter desk tasks.

  3. Position 03 Relaxed recline

    Reading, browsing and watching content.

  4. Position 04 Up to 145°

    Short recovery breaks, with the footrest out if fitted.

Niture SINC 2 reclined with the retractable footrest extended for a short break
Footrest options

Mini Footrest Built In, Retractable Footrest Optional

Every SINC 2 has an integrated mini footrest, a second place to rest your feet when you want to change leg position. You can also choose SINC 2 with a retractable footrest that slides out for deeper recline and tucks back under the seat for desk work.

Maximum recline
145°
Mini footrest
Included
Retractable footrest
Optional
!

Return to positions 1 or 2 for typing. In the deeper positions your arms and eyes move away from the desk, so keep them for reading, viewing and short breaks.

SINC Series comparison

How SINC 2 Compares with Other SINC Chairs

All six SINC models share the same movement system. What changes from model to model is the sitting character, recline feel, lumbar support, fit range and load rating. Use the rows below to see which differences matter for your body.

Same in every SINC

Dual mechanism: a recline mechanism plus a Smart-Glide™ mechanism. Every SINC model locks Smart-Glide™ upright; SINC 2 is the only one that also locks it at its lowest point.

Niture SINC Series comparison. ≈ values are manually measured fitting references (±1 cm). Seated seat height measured with a 75 kg adult.
Model SINC 2
You are here
SINC SINC Air SINC Lite SINC 3 UltraSinc
Product Positioning Two Smart-Glide™ lock points Balanced all-rounder Relaxed + more reclined Essential Smart-Glide™ Firm, stronger support Flagship SINC
Recommended height 145–190 cm 150–190 cm 158–190 cm 155–190 cm 158–190 cm 155–190 cm
Maximum load ≈130 kg ≈130 kg 110 kg ≈130 kg ≈130 kg ≈130 kg
Recline resistance Quick-tension knob Quick-tension knob Auto weight-sensing Quick-tension knob Auto, stronger Quick-tension knob
Maximum recline 145° 145° 150° 145° 145° 145°
Smart-Glide™ lock Upright + lowest point Upright Upright Upright Upright Upright
Lumbar support Twin DynamicRotary-knob depth ≈2 cm; ≈8–30 cm AdaptiveNo adjustment; ≈17–23 cm above seat 4 depth positions over 6 cmAdaptive / Fixed modes 3 height levels over 3 cmPlus one 2 cm depth step Twin Dynamic LumbarRotary-knob depth ≈2 cm Adaptive, pivots ≈15°Two side airbags
Seat height 45–53 cm≈38.5–44.5 cm seated 45–53 cm≈39–45 cm seated 45–55 cm≈39.5–47.5 cm seated 44–56 cm≈40.5–51.5 cm seated 47–55 cm≈39.5–47.5 cm seated 45–52 cm≈39–45 cm seated
Seat pan 53 × 53 cm 51 × 51 cm 51 × 51 cm 51 × 51 cm 51 × 51 cm 53 × 53 cm
Usable seat depth ≈38.5–49.5 cm ≈42–47 cm ≈40–51 cm ≈44–50 cm ≈40–46 cm ≈42–50 cm
Footrest Optional + mini footrest Optional Included Included Included Included

Unloaded seat height is measured from floor to seat front edge. Seated values use the same showroom method as the Niture 2026 buying guide. Seat pan is the physical seat size; usable seat depth is measured from the lumbar contact point to the seat front edge.

SINC 2 or the Hammock Series?

Hammock 2 uses a similar twin lumbar with a rotary depth knob, but it has no Smart-Glide™, uses a tension knob for recline and is rated up to 110 kg. Choose SINC 2 if you also want the back support to follow you, synchronized armrests and a 130 kg rating. See Hammock 2 or Hammock 1.

Dimensions + specifications

SINC 2 Fit Measurements and Technical Specifications

Start with the six fit measurements. They tell you more about whether SINC 2 suits your body than height alone. The full dimensions and adjustment ranges follow below.

The 6 Fit Measurements

Measured at the Niture Puchong showroom

1Seat height from ground
45–53 cm ≈38.5–44.5 cm when seated Can your feet rest flat with thighs roughly level?
2Usable seat depth
≈38.5–49.5 cm Seat slider + lumbar knob Is there a small gap behind your knees?
3Lumbar height from seat
≈8–30 cm Twin lumbar contact zone (22 cm surface) Does it meet the curve of your lower back?
4Headrest height from seat
≈51–79.5 cm Via dual joint, depth and backrest Does it reach your neck, upright and reclined?
5Armrest height from seat
≈20.5–29.5 cm Pads move with the recline Do your elbows rest without lifting your shoulders?
6Inner armrest width
≈33–61 cm Between the arm pads Can the pads sit close to your sides?

Chair Dimensions

Physical sizes and practical fit ranges.

Seat
Seat pan size53 × 53 cm
Seat height from ground45–53 cm≈38.5–44.5 cm seated
Usable seat depth≈38.5–49.5 cm
Backrest + headrest
Backrest width55 cm
Lumbar support width48 cm
Lumbar height from seat≈8–30 cm22 cm support surface
Headrest width40 cm
Headrest height from seat≈51–79.5 cm
Armrests
Armrest height from seat≈20.5–29.5 cm
Inner armrest width≈33–61 cm
Armrest height from floor66–81 cm
Overall
Overall chair height110–134 cm
Overall chair depth74 cm
Base diameter70 cm
Niture SINC 2 ergonomic chair dimension diagram showing seat height, usable seat depth, lumbar, armrest and headrest measurements

Adjustments and Movement

Every adjustment in one place.

Mechanism
SystemDual mechanismRecline mechanism + Smart-Glide™ mechanism
Recline mechanismSynchronized recline
Recline ratio2:1 backrest to seat
Recline tensionQuick-tension knob4 levels over 3 turns (≈50 / 70 / 90 / 110 kg reference)
Recline locks4 locking positionsUp to 145° recline
Smart-Glide™
ControlLock / ActivateLever on the backrest
Lock positionsUpright + lowest pointLowest-point lock unique to SINC 2
Seat movementRises ≈1.5 cm at maximum reclineDoes not slide forward
Lumbar + backrest
Lumbar typeTwin Dynamic Lumbar SupportTwo independently responsive sections
Lumbar depth≈2 cm forwardRotary knob
Lumbar heightFollows the backrest
Backrest height4 levels / 6 cm
Headrest
TypeDual-joint adjustable
Depth7 steps / 7 cm
Tilt / rotation70° / 70°
Height adjustmentNo separate sliderReach comes from tilt, depth and backrest height
Armrests + footrest
Armrests6D Dual-Axis, synchronizedHeight 7 levels / 9 cm · width 13 cm
Armrest tilt / rotation / pivot20° / 360° / 270°Fore–aft reach 54 cm
Moves with reclineYes
Seat slider4 steps44–50 cm
Mini footrestIntegrated
Retractable footrestOptional

General Specifications

Product positioningTwo Smart-Glide™ lock pointsMore upright + lumbar-focused
Recommended user height145–190 cmConfirm fit with the six measurements above
Maximum load130 kg
Warranty5 yearsSelected structural and mechanical components
MaterialWintex MeshSeat and backrest
Gas liftTÜV-certified Class 4
ColoursGrey, Black
Frequently asked questions

SINC 2 Questions, Answered

Short answers on fit, adjustment and recline. Every figure here matches the measurements above.

What type of ergonomic chair is SINC 2?

SINC 2 is the lumbar-focused model in the Niture SINC Series. It is a Wintex Mesh ergonomic chair with Smart-Glide™ back-support movement, Twin Dynamic Lumbar Support with about 2 cm of depth adjustment, synchronized recline with a quick-tension knob, a dual-joint headrest, 6D Dual-Axis armrests that move with the recline, and four recline locks up to 145°.

What makes SINC 2 different from other SINC chairs?

SINC 2 is the only SINC whose Smart-Glide™ can be locked at its lowest point as well as upright. It also has an adjustable twin lumbar, synchronized armrests, an integrated mini footrest and the widest recommended height range in the series, from about 145 cm.

What height and weight is SINC 2 suitable for?

SINC 2 is recommended for users approximately 145–190 cm tall and up to 130 kg. Together with SINC, it is one of the two SINC models recommended for users shorter than 158 cm. Also check seat height (45–53 cm), usable seat depth (≈38.5–49.5 cm), lumbar zone (≈8–30 cm above the seat) and headrest reach (≈51–79.5 cm).

How does the SINC 2 lumbar support adjust?

SINC 2 uses Twin Dynamic Lumbar Support: two lumbar sections that respond to your back independently. A rotary knob moves them about 2 cm forward, from gentler to more noticeable contact. Their height follows the backrest, which adjusts in four levels over 6 cm, and the lumbar surfaces cover roughly 8–30 cm above the seat.

How does the SINC 2 recline work, and can I adjust the tension?

The backrest and seat recline together at a 2:1 ratio, with four locking positions up to 145°, and the armrests move with them. A quick-tension knob sets how easily it reclines, with four levels over three turns, roughly matching 50, 70, 90 and 110 kg body-weight references. These are resistance settings, not weight limits.

How does the SINC 2 headrest adjust?

The dual-joint headrest extends forward in 7 steps, up to 7 cm, tilts 70° and rotates 70°. It has no separate height slider; its reach of approximately 51–79.5 cm above the seat comes from the joint angle, the depth and the backrest height.

What is the seat size and seat depth of SINC 2?

The seat pan is 53 × 53 cm. Seat height is 45–53 cm from the ground unloaded, or about 38.5–44.5 cm with a 75 kg adult seated. The seat slider moves through four steps (44–50 cm). Combined with the lumbar knob, usable seat depth is approximately 38.5–49.5 cm from the lumbar contact point to the seat edge, the shortest starting depth in the SINC Series.

Does SINC 2 come with a footrest?

Every SINC 2 has an integrated mini footrest. The retractable footrest is optional: you can choose SINC 2 with or without it.

How is SINC 2 different from SINC?

SINC has adaptive lumbar support that needs no setting, a 51 × 51 cm seat and armrests that stay put when you recline. SINC 2 has an adjustable twin lumbar, a 53 × 53 cm seat, synchronized armrests, a lowest-point Smart-Glide™ lock and a range from about 145 cm. Both use the same quick-tension recline.

What warranty does SINC 2 have, and where can I try it?

SINC 2 has a 5-year warranty on selected structural and mechanical components, subject to Niture’s warranty terms. You can try it free at the Niture showroom in Puchong, Selangor, open Monday to Sunday, 11 AM–5 PM. Walk-ins are welcome.

Free chair fitting · Niture Puchong

Sit in SINC 2 Before You Decide

Measurements narrow the choice, but the final test is how the twin lumbar meets your lower back. Compare SINC 2 side by side with SINC and the other models, and try both Smart-Glide™ lock points.

Fitting
Free
Hours
Mon–Sun, 11 AM–5 PM
Time needed
About 30 min

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Not sure which ergonomic chair to choose? Use our smart filter to quickly narrow down options by features, materials, and comfort preferences. Search Now...

Payment Options

Choose the payment method that suits you best. We accept Visa, Mastercard, FPX, and Buy Now Pay Later (BNPL) options.

Enjoy peace of mind with our reliable warranty coverage. Our dedicated support team is always ready to assist with after-sales service. Learn More...

Shipping & Delivery

Get your ergonomic furniture delivered safely and on time. We provide fast, secure, and trackable shipping options to ensure your order reaches you in perfect condition.

26% OFF

Price range: RM1,850.00 through RM1,999.00

Not sure which ergonomic chair to choose? Use our smart filter to quickly narrow down options by features, materials, and comfort preferences. Search Now...

Payment Options

Choose the payment method that suits you best. We accept Visa, Mastercard, FPX, and Buy Now Pay Later (BNPL) options.

Enjoy peace of mind with our reliable warranty coverage. Our dedicated support team is always ready to assist with after-sales service. Learn More...

Shipping & Delivery

Get your ergonomic furniture delivered safely and on time. We provide fast, secure, and trackable shipping options to ensure your order reaches you in perfect condition.