UltraSinc combines Smart-Glide™ movement support, Premium Wintex Mesh, adaptive lumbar control and synchronized arm support for demanding long-hour work.
Choose UltraSinc if you want Niture’s most complete combination of movement support, precise adjustment and premium long-hour comfort.
Height is only a starting point. Seat depth, torso length, lumbar position and headrest reach should also be checked.
Smart-Glide™ adds a separate layer of backrest movement alongside UltraSinc’s synchronized recline, helping the backrest maintain closer contact as your sitting angle changes.
Set the seat, lumbar support, armrests and headrest before judging the movement.
The synchronized recline changes the overall sitting angle while Smart-Glide™ allows additional movement at the backrest.
As your torso moves into recline, the additional backrest movement helps reduce the support gap against the lower back.
See how Smart-Glide™ differs from normal recline and how to test the movement correctly.
Adjust the backrest to suit your torso and position the lumbar support against your lower back. Then decide whether you want the lumbar section to move with you or remain more fixed.
Move the backrest through four height positions to change where the lumbar and upper-back sections meet your body.
The lumbar section can pivot as your lower back changes position. Use the rear adjustment wheel to progressively reduce that movement or set the support to a fixed position.
Tilt the upper section forward by up to 12° to maintain closer upper-back contact during typing, reading and other focused desk tasks.
UltraSinc uses Premium Wintex Mesh across the seat and backrest, creating a responsive sitting surface while allowing air to move through the areas in contact with your body.
The open mesh construction allows airflow through the seat and backrest during longer sitting sessions.
The mesh flexes under the body rather than relying on a thick layer of foam.
Tension across the mesh creates a suspended sitting surface that follows the chair’s support structure.
Set the seat height and usable depth to match your leg length first. A better seat fit makes the lumbar, backrest and headrest easier to position correctly.
Adjust the headrest in depth, rotation and tilt, then confirm that the final support position aligns with your neck rather than simply touching the back of your head.
The 6D Dual-Axis system gives you more control over where your elbows and forearms are supported, whether you sit close to the desk, type farther forward or change posture during the day.
Recline the chair up to 145° and choose from four locking positions when you want to move away from focused desk work into a more relaxed sitting position.
Extend the footrest when reclining to support the legs during short breaks, reading or more relaxed sitting.
UltraSinc is generally recommended for users around 155–190 cm, but two people of the same height can still need very different chair settings.
Adjust seat height and depth so your feet are supported and the seat edge does not press behind the knees.
Position the backrest so the lumbar and upper-back sections meet the intended areas of your back.
Confirm the headrest can reach your neck curve without pushing your head forward.
Every SINC model has a different sitting character. Choose according to how you work, how much support you prefer and how the chair fits your body.
Choose UltraSinc when you want the most complete combination of Smart-Glide™, adjustment range, premium materials and work-to-recovery support in the SINC Series.
| Model | Best For | Sitting Character | Main Reason to Choose |
|---|---|---|---|
| UltraSinc Flagship | Long-hour professionals wanting the most complete adjustment and recovery experience. | Adaptive + premium. Supports focused work, movement and deeper recline. | Smart-Glide™, adaptive lumbar, forward-tilt upper back, 6D Dual-Axis armrests and Premium Wintex Mesh. |
| SINC | Users who want a balanced Smart-Glide™ chair without moving to the flagship model. | Balanced. Natural mix of focused work, movement and recline. | The safest all-round starting point in the core SINC range. |
| SINC 2 | Users who prioritise focused desk work and more noticeable lower-back support. | More upright + lumbar focused. | Stronger lower-back character with extensive adjustment around focused work. |
| SINC Lite | Users making their first serious ergonomic upgrade or prioritising value. | Accessible + practical. | Essential Smart-Glide™ support at a lower entry point. |
| SINC 3 | Users who prefer a more substantial and stable support feel. | Firmer + more planted. | More substantial sitting character for users who prefer stronger support presence. |
| SINC Air | Home-office users who naturally prefer more relaxed sitting. | Relaxed + more reclined. | Lighter everyday sitting character with a more casual lean-back feel. |
The most expensive or most adjustable model is not automatically the best-fitting chair. Body proportions and support preference should still decide the final choice.
Start with the measurements that relate directly to your body, then check the chair dimensions, adjustment ranges and construction details.
These approximate measurements reference the main support positions from the seat or between the armrests, making them useful when comparing UltraSinc with your own body proportions.
Measurements are taken manually and may vary slightly between chairs and adjustment positions.
Adjustment ranges and construction details for UltraSinc.
Practical answers about body fit, adjustment and how UltraSinc compares with other SINC models.
UltraSinc is generally recommended for users around 155–190 cm.
Height is useful for shortlisting, but it does not guarantee fit. Leg length, torso length, lumbar position, arm position and headrest reach can differ between people of the same height.
UltraSinc has an approximate usable seat-depth range of ≈42–50 cm. The physical seat pan measures 53 × 53 cm.
These are different measurements. Use the ≈42–50 cm usable range when assessing whether the seat depth suits your leg length.
Measurements referenced from the seat and support points can be more useful than overall chair dimensions when comparing UltraSinc with your own body proportions.
Smart-Glide™ adds movement at the backrest so it can respond as your torso changes position, helping maintain closer back contact as you move through different sitting angles.
It works alongside the chair’s synchronized recline rather than being the recline mechanism itself.
The lumbar section can pivot by up to 15° as your lower back changes position.
Use the rear adjustment wheel to progressively reduce how much movement is allowed, or turn it fully to the right for fixed lumbar support.
The lumbar support area is approximately ≈14–19 cm above the seat, depending on the backrest position.
Use this measurement as a reference, then confirm the final position by checking where the support actually contacts your lower back.
Yes. Rear pump and release controls provide additional fine-tuning of the lumbar mesh tension.
Treat this as a secondary adjustment. First position the backrest and choose how freely you want the lumbar support to pivot.
UltraSinc uses 6D Dual-Axis armrests with height, width, depth, pivot, rotation and tilt adjustment.
The armrest height from the seat is approximately ≈20–29 cm, while the inner width between the armrests is approximately ≈36–63 cm. These measurements help indicate whether the armrests can be positioned comfortably around your body.
The 3D Dual-Joint Headrest provides 7 steps / 7 cm of depth adjustment, up to 70° rotation and up to 70° tilt.
Its approximate height from the seat is ≈55–86 cm. Final fit should be judged by whether the headrest reaches your neck curve without pushing your head excessively forward.
UltraSinc reclines up to 145° and provides four locking positions.
The retractable padded footrest can be extended when you want a more relaxed sitting or recovery position.
SINC is Niture’s balanced all-round Smart-Glide™ model. UltraSinc is the flagship model with a more extensive adjustment package, including adaptive lumbar pivot control, forward-tilt upper-back support and 6D Dual-Axis armrests.
SINC 2 has a more upright and lower-back-focused sitting character. UltraSinc combines a broader range of movement and adjustment features for users who want greater flexibility between focused work and reclined sitting.
Neither model is automatically the better fit. Body proportions and preferred support feel should decide.
UltraSinc provides adjustable seat depth, backrest height, lumbar response, upper-back position, headrest, armrests and recline for long workdays.
Correct adjustment, suitable desk positioning and regular changes in posture still matter during prolonged sitting.
Yes. UltraSinc is available for fitting at the Niture Puchong showroom.
You can check usable seat depth, lumbar position, armrest height and spacing, headrest reach and recline against your own body before deciding.
UltraSinc offers Niture’s most complete SINC experience, but the right chair is still the one that fits your proportions, support preference and the way you actually sit.
Confirm seat depth, backrest position, lumbar contact and headrest-to-neck reach against your own proportions.
Sit in UltraSinc, SINC and SINC 2 to compare their support character instead of deciding from specifications alone.
Try focused work, natural posture changes and recline before deciding which chair feels right over a full workday.
Visit the Niture showroom for a personal chair fitting and compare UltraSinc directly with other Niture models.
Choose UltraSinc when you want Niture’s flagship combination of movement support, adjustment range, Premium Wintex Mesh and work-to-recovery flexibility—and it fits your body when properly adjusted.
Only logged in customers who have purchased this product may leave a review.
Not sure which ergonomic chair to choose? Use our smart filter to quickly narrow down options by features, materials, and comfort preferences. Search Now...
Choose the payment method that suits you best. We accept Visa, Mastercard, FPX, and Buy Now Pay Later (BNPL) options.
Enjoy peace of mind with our reliable warranty coverage. Our dedicated support team is always ready to assist with after-sales service. Learn More...
Get your ergonomic furniture delivered safely and on time. We provide fast, secure, and trackable shipping options to ensure your order reaches you in perfect condition.
Original price was: RM3,500.00.RM2,499.00Current price is: RM2,499.00.
Not sure which ergonomic chair to choose? Use our smart filter to quickly narrow down options by features, materials, and comfort preferences. Search Now...
Choose the payment method that suits you best. We accept Visa, Mastercard, FPX, and Buy Now Pay Later (BNPL) options.
Enjoy peace of mind with our reliable warranty coverage. Our dedicated support team is always ready to assist with after-sales service. Learn More...
Get your ergonomic furniture delivered safely and on time. We provide fast, secure, and trackable shipping options to ensure your order reaches you in perfect condition.
Reviews
There are no reviews yet.