Prefer a balanced, softer support feel
SINC gives the balanced Smart-Glide™ sitting character with adaptive lumbar support. SINC Lite keeps the essentials at a lower price.



The firm SINC model: Smart-Glide™ movement with firm lower-back support and stronger recline resistance.
The Niture SINC 3 is a full-mesh ergonomic chair for people who want firm, clearly felt support. It is the firmest model in the Niture SINC Series, combining Smart-Glide™ back-support movement, an auto weight-sensing synchro mechanism with stronger recline resistance, Twin Dynamic Lumbar Support with about 2 cm of depth adjustment, a 4D headrest, Dual-Axis 5D armrests, a retractable footrest and four recline locks up to 145°.
SINC 3 is recommended for users approximately 158–190 cm tall and up to 130 kg, and is often the first SINC we suggest for users around 100 kg and above. It comes with a 2-year warranty, and you can try it free at the Niture showroom in Puchong, Selangor.
≈ values are manually measured fitting references (allow about ±1 cm). Seated seat height is measured at the showroom with a 75 kg adult, using the same method as the Niture 2026 buying guide.
SINC 3 is built around one preference: support you can clearly feel. Its recline resistance sits on the stronger side and its twin lumbar gives firm lower-back support. If that sounds like you, it is a strong fit. If not, another Niture chair will usually suit you better.
If one of these describes you, start with the suggested model instead.
Prefer a balanced, softer support feel
SINC gives the balanced Smart-Glide™ sitting character with adaptive lumbar support. SINC Lite keeps the essentials at a lower price.
Like to sit slightly leaned back most of the day
SINC Air is the relaxed SINC, with recline to 150° and four lumbar-depth positions. It is rated up to 110 kg.
Want the most adjustable SINC
UltraSinc is the premium SINC, with Wintex Mesh, adaptive lumbar support that pivots and a forward-tilting upper back.
Are shorter than about 158 cm
SINC and SINC 2 are the models we recommend. SINC starts from about 150 cm, and SINC 2 has the widest range in the series, from about 145 cm. Both have a lower seat than SINC 3.
Don't need Smart-Glide™ and prefer a simpler chair
The Hammock Series uses tension-knob recline. Hammock 1 gives focused support; Hammock 2 gives wrapping support. Both are rated up to 110 kg.
Still deciding? Answer a few questions in the Chair Finder, or sit in SINC 3 and the other models free at our Puchong showroom.
SINC 3 uses two separate systems: an auto weight-sensing synchro mechanism that controls how the chair reclines, and Smart-Glide™, which controls how the back support follows you as you move.
The synchro mechanism tilts the backrest and seat together at a 2:1 ratio and sets the recline resistance automatically from your body weight. On SINC 3 that resistance is tuned on the stronger side, which is why it suits heavier users and anyone who finds other chairs recline too easily.
Smart-Glide™ works on its own, even when the recline is locked. When it is active, the back-support structure moves with your body instead of staying fixed. At maximum recline the seat rises about 1.5 cm. It does not slide forward.
These are often described as one feature. On SINC 3, each one is separate.
As you lean back, the backrest and seat tilt together, with the backrest moving twice as far as the seat.
The mechanism reads your weight as you lean back and sets the resistance for you. On SINC 3 the resistance is stronger, so the backrest feels steadier under heavier users.
When activated, the back-support structure moves with your body as your sitting position changes, whether the recline is locked or free.
SINC 3 uses the same Smart-Glide™ control as SINC 2.
Lock the back support at its original upright position for a steadier, more fixed support feel.
Release the lock and the back support follows your movement, even while the recline itself is locked at a set position.
SINC 3 supports the lower back with two lumbar sections that respond to your back independently. A rotary knob moves them about 2 cm forward, so you choose between gentler and more noticeable contact.
The twin lumbar sections cover a contact zone of approximately 8–25 cm above the seat. Their height follows the backrest: raise or lower the backrest through its four steps (6 cm in total) to bring the lumbar to the curve of your lower back. A fifth step returns the backrest to its lowest position.
Bringing the lumbar forward also shortens the usable seat depth, because your back meets the chair earlier. See seat fit for the ranges.
People of the same height can have very different torso lengths. SINC 3 handles this in two steps: a four-step backrest that brings the lumbar to your lower back, then a 4D headrest that reaches your neck.
Lift the backrest one step at a time through four steps, 6 cm in total. Lifting once more from the top step returns it to the lowest position. Because the twin lumbar is part of the backrest, this is also how you set the lumbar height. See lumbar support.
Raise the headrest to your neck, bring it forward, then tilt and rotate it so it stays in contact whether you sit upright at the desk or lean back.
Unlike SINC Air, the SINC 3 headrest has its own height adjustment. Its reach comes from:
Because the backrest height adjusts, SINC 3, like every SINC model, can raise its support for longer torsos. Check that the headrest still reaches your neck with the backrest set for your lower back.
Set the seat for your legs first, then bring the armrests to your elbows. These are the measurements that decide whether SINC 3 fits your body, not just your height.
Usable depth is the distance from where your back meets the chair to the front edge of the seat. The seat slider moves through four steps over 5 cm. Bringing the lumbar knob forward also shortens it slightly, because your back meets the chair earlier.
| Setting | Value |
|---|---|
| Seat slider | 4 steps / 5 cm |
| Lumbar depth knob | ≈2 cm forward |
| Usable depth, all settings | ≈40–46 cm |
≈40–46 cm is the combined fitting range, measured from the lumbar contact point to the seat front edge. Measured manually; allow about ±1 cm.
Air passes through the mesh seat, so less heat builds up during long sitting. A cushioned layer at the front edge softens contact under your thighs.
The same breathable mesh continues through the backrest, keeping airflow across both main contact areas.
Two pivot joints move the whole armrest rather than just sliding the pad, so support can follow your elbows for typing, mouse work, phone use or reclining. These are the same Dual-Axis 5D armrests used on the Hammock Series.
SINC 3 locks at four recline positions, up to a maximum of 145°. Use the first two for desk work and calls, and the deeper two with the footrest for reading, viewing and short breaks. Resistance adjusts automatically to your weight and stays on the stronger side, and Smart-Glide™ can stay active at any locked position.
Focused keyboard and mouse work at the desk.
Online meetings, calls and lighter desk tasks.
Reading, browsing and watching content.
Short recovery breaks, with the footrest out.
Every SINC 3 comes with a retractable footrest. Slide it out to support your legs when you lean back, then tuck it away again when you return to the desk, so it never gets in the way of normal sitting.
Return to positions 1 or 2 for typing. In the deeper positions your arms and eyes move away from the desk, so keep them for reading, viewing and short breaks.
All six SINC models share the same movement system. What changes from model to model is the sitting character, recline feel, lumbar support, fit range and load rating. Use the rows below to see which differences matter for your body.
Dual mechanism: a recline mechanism plus a Smart-Glide™ mechanism. Every SINC model locks Smart-Glide™ upright, and SINC 2 also locks it at its lowest point.
Swipe the table sideways to see all six models →
| Model | SINC 3 You are here |
SINC Air | SINC Lite | SINC | SINC 2 | UltraSinc |
|---|---|---|---|---|---|---|
| Product Positioning | Firm, stronger supportStronger auto recline resistance; often chosen at ≈100 kg+ | Relaxed + more reclined | Essential Smart-Glide™ | Balanced all-rounder | Two Smart-Glide™ lock points | Premium SINC |
| Recommended height | 158–190 cm | 158–190 cm | 155–190 cm | 150–190 cm | 145–190 cm | 155–190 cm |
| Maximum load | ≈130 kg | 110 kg | ≈130 kg | ≈130 kg | ≈130 kg | ≈130 kg |
| Maximum recline | 145° | 150° | 145° | 145° | 145° | 145° |
| Smart-Glide™ lock | Upright | Upright | Upright | Upright | Upright + lowest point | Upright |
| Lumbar support | Twin Dynamic LumbarRotary-knob depth ≈2 cm; zone ≈8–25 cm | 4 depth positions over 6 cmAdaptive / Fixed modes | 3 height levels over 3 cmPlus one 2 cm depth step | Adaptive lumbar support | Rotary-knob depth≈2 cm forward travel | Adaptive, pivots ≈15°Two side airbags |
| Seat height | 47–55 cm≈39.5–47.5 cm seated | 45–55 cm≈39.5–47.5 cm seated | 44–56 cm≈40.5–51.5 cm seated | 45–53 cm≈39–45 cm seated | 45–53 cm≈38.5–44.5 cm seated | 45–52 cm≈39–45 cm seated |
| Seat pan | 51 × 51 cm | 51 × 51 cm | 51 × 51 cm | 51 × 51 cm | 53 × 53 cm | 53 × 53 cm |
| Usable seat depth | ≈40–46 cm | ≈40–51 cm | ≈44–50 cm | ≈42–47 cm | ≈38.5–49.5 cm | ≈42–50 cm |
| Footrest | Included | Included | Included | Optional | Optional | Included |
Unloaded seat height is measured from floor to seat front edge. Seated values use the same showroom method as the Niture 2026 buying guide. Seat pan is the physical seat size; usable seat depth is measured from the lumbar contact point to the seat front edge.
Start with the six fit measurements. They tell you more about whether SINC 3 suits your body than height alone. The full dimensions and adjustment ranges follow below.
Measured at the Niture Puchong showroom
Physical sizes and practical fit ranges.
| Seat | |
|---|---|
| Seat pan size | 51 × 51 cm |
| Seat height from ground | 47–55 cm≈39.5–47.5 cm seated |
| Usable seat depth | ≈40–46 cm |
| Backrest + headrest | |
| Lumbar contact zone from seat | ≈8–25 cm |
| Headrest height from seat | ≈59–84 cm |
| Armrests | |
| Armrest height from seat | ≈18–27 cm |
| Inner armrest width | ≈41.5–65.5 cm |
Every adjustment in one place.
| Mechanism | |
|---|---|
| System | Dual mechanismRecline mechanism + Smart-Glide™ mechanism |
| Recline mechanism | Synchronized recline |
| Recline ratio | 2:1 backrest to seat |
| Recline resistance | Automatic, set by body weightTuned on the stronger side |
| Recline locks | 4 locking positionsUp to 145° recline |
| Smart-Glide™ | |
| Lock position | Upright |
| Seat movement | Rises ≈1.5 cm at maximum reclineDoes not slide forward |
| Lumbar + backrest | |
| Lumbar type | Twin Dynamic Lumbar SupportTwo independently responsive sections |
| Lumbar depth | ≈2 cm forwardRotary knob |
| Lumbar height | Follows the backrest |
| Backrest height | 4 steps / 6 cm5th step returns to lowest |
| Headrest, armrests + seat | |
| Headrest type | 4D adjustable |
| Headrest height | 5 steps / 5 cm |
| Headrest depth | 2 steps / 3 cm3rd step returns to start |
| Headrest tilt / rotation | 60° / 110° |
| Armrests | Dual-Axis 5DHeight 7 steps / 9 cm · width up to 13 cm |
| Armrest rotation / pivot | 360° / up to 270°Fore–aft reach up to 54 cm |
| Seat depth | 4 steps / 5 cm |
| Footrest | RetractableIncluded as standard |
| Product positioning | Firm, stronger support |
|---|---|
| Recommended user height | 158–190 cmConfirm fit with the six measurements above |
| Maximum load | 130 kg |
| Warranty | 2 yearsMechanism, gas lift, chair frame and base |
| Material | Breathable Mesh ComfortSeat and backrest; cushioned front seat edge |
|---|---|
| Gas lift | SGS-certified Class 4 |
| Base | Heavy-duty nylon |
Short answers on fit, adjustment and recline. Every figure here matches the measurements above.
SINC 3 is the firm-support model in the Niture SINC Series. It is a mesh ergonomic chair with Smart-Glide™ back-support movement, an auto weight-sensing synchro mechanism with stronger recline resistance, Twin Dynamic Lumbar Support, a 4D headrest, Dual-Axis 5D armrests, a retractable footrest and four recline locks up to 145°.
SINC 3 suits people who want firm, clearly felt support: users around 100 kg and above, people who find other chairs recline too easily, and anyone who prefers firm lower-back support. If you prefer a softer, lighter feel, compare SINC, SINC Lite or SINC Air first.
SINC 3 is recommended for users approximately 158–190 cm tall and up to 130 kg. Height is only a starting point, so also check the seat height (47–55 cm), usable seat depth (≈40–46 cm), lumbar contact zone (≈8–25 cm above the seat) and headrest reach (≈59–84 cm above the seat).
There is no tension knob. SINC 3 uses an auto weight-sensing synchro mechanism that sets the recline resistance from your body weight, and on SINC 3 it is tuned on the stronger side. The backrest and seat recline together at a 2:1 ratio, with four locking positions up to 145°.
SINC 3 uses Twin Dynamic Lumbar Support: two lumbar sections that respond to your back independently. A rotary knob moves them about 2 cm forward, from gentler to more noticeable contact. Their height follows the backrest, which adjusts in four steps over 6 cm.
The 4D headrest adjusts in height (5 steps over 5 cm), depth (2 steps over 3 cm; a third push returns it to the start), tilt (60°) and rotation (110°). Together with the backrest height, it reaches approximately 59–84 cm above the seat.
The seat pan is 51 × 51 cm. Seat height is 47–55 cm from the ground unloaded, or about 39.5–47.5 cm with a 75 kg adult seated. The seat slider moves through four steps over 5 cm, giving a usable seat depth of approximately 40–46 cm from the lumbar contact point to the seat edge.
Yes. Every SINC 3 comes with a retractable footrest as standard. Slide it out when you recline for reading or short breaks, and push it back under the seat when you return to the desk.
Both have the same dual mechanism and Smart-Glide™. SINC 3 has stronger automatic recline resistance, Twin Dynamic Lumbar Support for firm lower-back support, a 47–55 cm seat height and a footrest included. SINC has a more balanced feel with adaptive lumbar support, a 45–53 cm seat height and an optional footrest.
SINC 3 has a 2-year warranty covering the mechanism, gas lift, chair frame and base, subject to Niture’s warranty terms. You can try it free at the Niture showroom in Puchong, Selangor, open Monday to Sunday, 11 AM–5 PM. Walk-ins are welcome.
Measurements narrow the choice, but the final test is how firm support feels on your back, legs and neck. Compare SINC 3 side by side with the other SINC and Hammock models.
Only logged in customers who have purchased this product may leave a review.
Not sure which ergonomic chair to choose? Use our smart filter to quickly narrow down options by features, materials, and comfort preferences. Search Now...
Choose the payment method that suits you best. We accept Visa, Mastercard, FPX, and Buy Now Pay Later (BNPL) options.
Enjoy peace of mind with our reliable warranty coverage. Our dedicated support team is always ready to assist with after-sales service. Learn More...
Get your ergonomic furniture delivered safely and on time. We provide fast, secure, and trackable shipping options to ensure your order reaches you in perfect condition.
RM2,699.00 Original price was: RM2,699.00.RM1,650.00Current price is: RM1,650.00.
Not sure which ergonomic chair to choose? Use our smart filter to quickly narrow down options by features, materials, and comfort preferences. Search Now...
Choose the payment method that suits you best. We accept Visa, Mastercard, FPX, and Buy Now Pay Later (BNPL) options.
Enjoy peace of mind with our reliable warranty coverage. Our dedicated support team is always ready to assist with after-sales service. Learn More...
Get your ergonomic furniture delivered safely and on time. We provide fast, secure, and trackable shipping options to ensure your order reaches you in perfect condition.
Zetty –
Found a gem, so happy to get the early bird discount for SINC-3, when they introduce this chair to me, I dont have the good feel on the plastic lumbar support but surprisingly it is very comfortable, first time experience the smart glide, very different from normal chair. Seller very patient to demo how to use 5D armrest, wow, never thought need to learn how to use the armrest. Hope next time seller can provide user guide video.
Nazril Bt –
I am completely impress to the 5D armrest! it is a good design and versatile, it took me a while to get use to the armrest, but it is all good. This is a high quality ergonomic chair, I came all of the way from Malacca to test the chair prior purchase, this place is worth to visit to give a try, the team is knowledgeable and friendly to share their experience or suggestion.
Wei Tan –
Went to the showroom for RM500 chair, it turn up I bought SINC-3, I prefer stronger support, therefore it is either Motion and SINC-3, SINC-3 is more price worthy and have more adjustability compare to Motion, thus I voted to get SINC-3 home!
Hazwan Ahmad –
Niture have plenty of choice for the Ergo chair, you must expect to spend a long time in the showroom as all of the ergonomic chair gives different feeling! No wonder many recommend must visit showroom. I like SINC 3 becos the lumbar support gives strong slope push, hehehe, feel like I am stretching my body every time I lean back. The plastic lumbar support look abit weird to me, but I like it becos it is very cooling when lean on it, my room has no aircond , thus this will be helpful and easy to clean it.
Eason Ho –
I spent few days to study Niture’s product as there is no showroom in Penang. Good thing is the website is very informative and customer service is helpful. Finally I got my chair today, the box is big and everything look good upon unboxing, inside have an instruction manual, it is easy to set up, the chair is quite heavy. I am 98kgs, as such I prefer stronger lumbar support, was struggle in between SINC-3 & Motion, voted for SINC3 due to hot weather. The smart glide experience is amazing, especially the strong push while tilting. SINC3 have too many functions, it took me a while to get understand of it and once is adjusted, everything is perfect for me. Thank you
Louis29 –
Introduced by friend, have not heard of this brand b4, visited the showroom and the ergonomic chairs are very impressive, I chose Sinc 3 becos it has more adjustabilities compare to others and I like the strong lumbar support, the plastic lumbar support look ugly for me but it is comfortable.
Johann –
This is the most comfortable ergonomic chair ive had sit on. Is it exspenive? Nope. It is affordable cheap with quality material. branded ergonomic chair will cost you triple or 4 times of this chair plus with less or same features. My old Merryfair cost the same as this chair but with lesser feature, less adjustment and with no head rest. Sinc 3 have all the adjustment you want. Arm rest is the spotlight of this chair. The adaptive tilt backrest is amazing good. And theres is so much thing you can adjust to suit you. And my experiance dealing with the customer service is what i really appreciate. Ms. Amelia help me so much and cant thanks her enough. Helping me to resolve my issue without any complaint. Thanks ms. Amelia. For me the most important thing is that you know they do take care their customer. The price is reasonable cheap and the comfort and adjustment you get is worth the price alone.
Micah –
I went with the SINC-3 for its superior support compared to other chairs. After two weeks of use, I’m especially impressed by the armrests—they’re incredibly ergonomic and make a big difference. Honestly, this is the best investment I’ve made this year
Sheyen –
Showroom experience was awesome, very helpful and friendly team. I like the most is immediate stock is available for pick up instantly after purchase, the chair come with pre-assembled can put in my car straight away! I personally prefer strong lumbar support, struggle to select Sinc 3 and Motion but finally I chosen Sinc 3 becos I prefer mesh seat and with footrest. I can feel the chair is premium and comfortable, 5 years hassle free warranty give me more confident to buy from Niture.
Aminudin –
Niture truly deserves more recognition! Your ergonomic chairs are fantastic and offer incredible value at an affordable price. Honestly, if a friend hadn’t recommended you, I might never have discovered your brand. The team was exceptionally professional, taking the time to explain every detail about the chairs and recommend the perfect one to suit my needs. That said, your marketing doesn’t fully reflect how amazing your products are! I hope more people get the chance to experience the comfort and quality of Niture chairs—keep up the great work!
HwaSin@Lee –
I did some research before heading to Niture, the showroom is a bit far but it is worth for the trip, Niture have variety choice of ergonomic chair compare to others, the staff are friendly and knowledgeable, I found Niture is the only brand show the ANSI BIFMA certificate to public. I bought SINC 3 because i love the lumbar support very much, it is a perfect chair for me. Highly recommend Showroom visit!
Shawn –
Niture have the most comprehensive ergonomic chair, you dont really need to visit others, I am pretty sure you can find a suitable chair from the showroom. Staff are friendly and patient, they recommend the chair in accordance to my budget. We spent a very long time there but didnt purchase in the 1st visit, but they still didnt hard push and we have a pleasant moment in the showroom to interact with others customer. Thank you to Lynn.
Bucky –
One of the best chair I’ve sat on. The backrest is cool, and the SMART-GLIDE is really quite an incredible feeling. Built in footrest is more useful than you might think. Headrest that actually supports your neck and doesn’t just push your head forward. I have a lot of good things to say about this chair, and it is one that I would recommend to everyone if not for two major flaws:
1. The plastic lumbar support is held in place by bottom hinges and two top screws tightening into a plastic piece. Unfortunately either due to design oversight or just repetitive stress, the screw will eventually back out and the plastic piece may fall out. Every time the screw backs out, it gets easier and easier to back out and you will have to basically reseat the screw every few weeks.
2. When SMART-GLIDE is engaged, after a few weeks of continuous usage the upper hinges holding the backrest will start squeaking very loudly. It’s a plastic on plastic piece. I don’t even know why it would get so loud.
Until this two issue is resolved, I cannot wholeheartedly recommend this chair. It’s biggest upside is also where the most flaws appear. It’s also not a one time thing because I have gotten the entire backrest replaced one time. It’s a shame because it’s such a great chair.
Rania#99 –
Went to many showrooms and I must praise Niture is the only shop that selling a Decent Ergonomic Chairs, thumb up to the sales rep walk through every chair patiently, explain very deep detail on each chair, met some return customers in the showroom share their experience too. Thank you Niture